Nortel Networks 10BASE-T manual Save Current Settings, Reset

Using the BayStack 410-24T 10BASE-T Switch

Save Current Settings

The Save Current Settings option (accessed from the main menu) allows you to save your current configuration settings without resetting your switch or stack. This option is followed by a screen prompt that precedes the action. Enter Yes to save your configuration settings; enter No to abort the option. If your switch is participating in a stack configuration, additional prompts allow you to save your configuration settings for a specific unit in the stack or for the entire stack.

Reset

The Reset option (accessed from the main menu) allows you to reset a standalone switch, a specific unit in a stack configuration, or an entire stack without erasing any configured switch parameters. Resetting the switch takes approximately 5 seconds. During this time, the switch initiates a self-test that comprises various diagnostic routines and subtests. The LEDs display various patterns to indicate that the subtests are in progress. The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test screen (Figure 3-53), which is followed by the Nortel Networks logo screen (Figure 3-54).

Note: The Self-Test screen remains displayed only if the self-test detects a fatal error.

3-124 309985-C Rev 00