Nortel Networks 10BASE-T manual AC Power Receptacle, International Power Cord Specifications

Introduction to the BayStack 410-24T Switch

AC Power Receptacle

The AC power receptacle accepts the AC power cord (supplied). For installation outside of North America, make sure that you have the proper power cord for your region. Any cord used must have a CEE-22 standard V female connector on one end and must meet the IEC 320-030 specifications.

Table 1-2 lists specifications for international power cords.

Table 1-2. International Power Cord Specifications

Country/Plug description		Specifications	Typical plug
Australia:		240 VAC
•	AS3112-1981 Male plug	50 Hz
		Single phase
			230FA
Continental Europe:		220 or 230 VAC
• CEE7 standard VII male plug		50 Hz
• Harmonized cord (HAR marking		Single phase
	on the outside of the cord jacket
	to comply with the CENELEC		228FA
	Harmonized Document HD-21)
U.S./Canada/Japan:		100 or 120 VAC
•	NEMA5-15P male plug	50–60 Hz
• UL recognized (UL stamped		Single phase
	on cord jacket)

•CSA certified (CSA label

	secured to the cord)	227FA
United Kingdom:		240 VAC
•	BS1363 male plug with fuse	50 Hz
•	Harmonized cord	Single phase

229FA

309985-C Rev 00 1-7