Nortel Networks 10BASE-T manual MAC Address Security Table Screen Fields, Allowed Source

Using the BayStack 410-24T 10BASE-T Switch

Table 3-11.	MAC Address Security Table Screen Fields
Field	Description
Find an Address	Allows you to search for a specific MAC address that is used in any of the
	MAC Address Security Table screens.
MAC Address	Allows you to specify up to 448 MAC addresses that are authorized to access
	the switch. You can specify the ports that each MAC address is allowed to
	access using the Allowed Source field (see next field description). The
	specified MAC address does not take effect until the Allowed Source field is
	set to some value (a single unit/port number or a port list value that you
	previously configured in the MAC Address Security Port Lists screen). You can
	clear an existing MAC address field by entering zero (0) in the field and
	pressing [Enter].
	Default	-	- - - - (no address assigned)
	Range	A range of 6 hexadecimal octets, separated by dashes (IP
		multicast1 and broadcast addresses are not allowed).
Allowed Source	Allows you to specify the ports that each MAC address is allowed to access.
	The options for the Allowed Source field include a single unit/port number or a
	port list value that you have previously configured in the MAC Address
	Security Port Lists screen.
	Default	-	(Blank field)
	Range	A single unit/port or port list value (for example, 1/3,1/6,S5).

1 IP multicast address -- Note that the first octet of any IP multicast address will always be an odd number.

3-38 309985-C Rev 00