![](/images/new-backgrounds/1266170/266170315x1.webp)
Using the BayStack 410-24T 10BASE-T Switch
Table | System Characteristics Screen Fields | |
|
|
|
Field | Description |
|
|
| |
Operation Mode | ||
| • When the unit is part of a stack configuration, the | |
| unit is operational in a stack, and lists the current unit number of this switch. In | |
| this example (see Figure | |
| • When the unit is not part of a stack configuration (operating standalone), the | |
| ||
| mode, the Size of Stack and Base Unit fields (see following description) do not | |
| appear. |
|
Size of Stack | This | |
| configuration. This field indicates the number of units configured in the stack | |
| configuration (1 to 8 units maximum). | |
Base Unit | This | |
| configuration. This field indicates the unit number of the switch that is currently | |
| operating as the base unit. | |
MAC Address | The MAC address of the BayStack | |
| in a stack configuration, the MAC address of the stack configuration. | |
Reset Count | A | |
| was first loaded on the switch. | |
| Default | 1 |
| Range | 0 to 232 |
Last Reset Type | A | |
| Default | Power Cycle |
| Range | Power Cycle, Software Download, Management Reset, |
|
| Management Factory Reset |
Power Status | A | |
| Default | Primary Power |
| Range | Primary Power, Redundant Power, Primary and Redundant Power |
Local MDA Type | A | |
sysDescr | A | |
| firmware version, the software version, and the ISVN (see “Stack Operation” on | |
| page |
(continued)