Nortel Networks 10BASE-T manual ATM MDA Configuration, LEC Configuration Screen Fields

Using the BayStack 410-24T 10BASE-T Switch

Table 3-32. LEC Configuration Screen Fields (continued)

FieldDescription

Actual Physical This read-only field displays the actual physical port for the selected LEC.

Port

DefaultA1

Range A1, A2

LEC Fail Over This read-only field displays the LEC Fail Over setting for the ATM MDA. You can set the LEC Fail Over field using the ATM MDA Configuration screen (see “ATM MDA Configuration” on page 3-88).

ATM MDA Configuration

The ATM MDA Configuration screen (Figure 3-37) allows you to set up ATM configuration parameters for your BayStack 450-2M3/2S3 MDA.

Certain fields in this screen may require you to reset the switch if you change the current or default value for another value. The reset option is always preceded by a screen prompt. Enter Yes to reset the switch; enter No to abort the option.

You can also use this screen to view the current BayStack 450-2M3/2S3 MDA:

•Hardware version

•Software version

•Hardware type

•MAC addresses for physical ports A1 and A2

Choose ATM MDA Configuration (or press a) from the ATM Configuration Menu screen to open the ATM MDA Configuration screen.

3-88 309985-C Rev 00