Read Only Parameters, User Set Parameters | Faber M1024, M640, M1600

Read Only Parameters

Parameter	Description
Device Vendor	For the Genie Monochrome series, this is always DALSA.
Device Model Name	Displays the device model name (for example, Genie M640).
Device Version	Displays the device version.
Firmware Version	Displays the currently loaded firmware version.
Device ID	Displays the camera serial number.
MAC Address	Displays the unique MAC (Media Access Control) address of the Genie camera.

User Set Parameters

Parameter	Description
Device User ID	Specifies a user written ID, of up to 15 characters, for the Genie camera.
	By default, this field is set to the serial number of the camera.
Power-up Configuration	Click Setting to open the Power-up configuration dialog box which allows you to specify
	camera power-up configuration. For more information, see "Power-up Configuration" on page
	32.

Power-up Configuration

The Power-up configuration dialog allows you to specify the camera configuration to load when powering-up the camera. The Genie camera flash memory contains two possible configuration settings; the Factory Default, and a user-defined Camera Configuration 1. The Camera Power-up configuration drop-down list box allows you to select either the Factory Default or a user specified camera configuration file. To save the current CamExpert settings to the camera user-defined (Camera Configuration) setting, click Save. To view in CamExpert a camera configuration file currently saved in the camera, select the configuration file in the Load configuration from Camera drop-down list, and click Load. See "Genie Power-up Configuration" on page 67 for a list of the saved parameters.

32 • Operational Reference

Genie Monochrome Series-GigE Vision Camera

Image 34

Faber M1024, M640, M1600, M1400 Read Only Parameters, User Set Parameters, Power-up Configuration, Parameter Description

Contents

Genie Monochrome Series Genie Framework M640 M1024 M1400 M1600 CA-GENM-MUM00 Contents Ynchronization T Iming Sapera Camexpert Guide Dalsa Contact Information Genie Monochrome Series Overview Description Genie Application Advantages Product Part Numbers Camera Sensor Size ResolutionGenie Cables & Accessories sold separately Product number Fps Product Number Camera Performance Specifications Certifications Supported Industry StandardsGenie Sensor Overview RoHS Genie M640-1/2 Specifications Item / Feature Specification Genie M640-1/3 Specifications Genie M1024 Specifications Genie M1400 Specifications ICX267AL Genie M1600 Specifications Sapera LT Library with optional Processing Application Development OverviewGenICam Environment Page Using Genie with Ethernet Switches Installing the Genie CameraSupported Network Configurations GigE Network Adapter Guideline Using Genie with a Vlan Ethernet Switch Installation Overview & PreparationsNetwork and Computer Overview Sapera LT Library Installation Installation Overview Procedure Genie CD Package InstallationGigE Server Verification Connectors Connect the Genie Camera Status LED Codes LED State Definition Typical LED States on Power Up Genie IP Configuration SequenceGigE Server Status Optimizing the Network Adapter used with Genie Increasing Adapter Buffers and Jumbo Frames Select NIC Advanced Configuration Properties Receive Descriptors Running the Network Configuration Tool Jumbo Frames Updating Genie Firmware Page Quick Test with CamExpert About the User-Defined Camera Name Operational Reference Access Via CamExpertCamera and Sensor Information User Set Parameters Power-up ConfigurationRead Only Parameters Parameter Description Sapera Camera Information via Sapera LT or GenICam Applications Sensor Controls Sensor Parameters Controls Via CamExpert Controls on Gain and Black Level Controls Partial Scan vertical cropping Partial Scan-Window ROIVertical Lines M640 M1024 M1400 Acquired Partial Scan horizontal cropping Window ROI Window ROI Control via Sapera LT or GenICam Applications CamExpert Image Buffer and ROI Parameters Binning Trigger Modes Binning Control via Sapera LT or GenICam Applications Exposure Controls Free-running Programmable Exposure External Trigger Programmable Exposure External Trigger Level-controlled Exposure Exposure Controls via Sapera LT or GenICam Applications Synchronous Mode Synchronization Timing Reset Mode Synchronization Mode via Sapera LT or GenICam Applications CamExpert I/O Controls Dialog Parameter Description General Inputs Settings Via CamExpert External Input Signal Opto-coupler & Debounce CircuitGeneral Inputs Input Controls via Sapera LT or GenICam Applications TriggerSelector = not used General Outputs Settings via CamExpert Strobe and General Outputs Open and Close Output Settings Strobe On Start of Exposure Event Mode Pulse On Valid Trigger Event Mode Pulse On Invalid Trigger Event Mode Pulse On Start of Readout Event Mode Pulse On End of Readout Event Mode Pulse On End of Acquisition Event Mode Pulse On Input 1 or Input 2 Event Modes Output Control via Sapera LT or GenICam Applications Genie Processing FeaturesLookup Table LUT LUT Control via Sapera LT or GenICam Applications Sapera++ classes used Flat Field Correction Calibration Procedure Flat Field Image Shading Correction CamExpert Flat Field Calibration Menu Using Flat Field Correction Horizontal Image FlipVertical Internal Image Test Patterns Genie test patterns are Test Image Select via Sapera LT or GenICam Applications EventsSapera Callbacks Event Selection via GenICam Applications Transfer Event Name Description Network Controls & GigE Vision Parameters CamExpert GigE Vision Parameters Network Controls via Sapera LT or GenICam Applications Genie Power-up Configuration ROI Power-up Control via Sapera LT or GenICam Applications Sapera Supported Features ListAccessing Features with Sapera++ LT Feature Name Access Type Value Feature Type StringFeature Type Enum Feature Name Access Type Values LUTFormat Feature Type INT32 Feature Name Access Type Exponent Sample Value Feature Type Bool Feature Interdependence Diagrams Trigger Enable True Trigger Enable False Vertical Binning Output SelectorHorizontal Binning Network Configuration Mode Pixel FormatPage Network Tools IP Configuration Mode DetailsLink-Local Address LLA Dhcp Dynamic Host Configuration Protocol Persistent IP Network Configuration Tool Quick Genie Network Configuration System Information and Configuration Network Card Information and Configuration NIC IP and Network Imaging Driver Assignment Recovering a Camera with an Unknown Persistent IP To recover a Genie Sapera GigE Server Details Creating a Status Report Status Window Description Using CamExpert with Genie Monochrome Cameras Sapera CamExpert Guide CamExpert Panes CamExpert LUT Controls Software trigger button Bit Invert LUT Technical Specifications Mechanical Specifications Pin Hirose Connector Signal Details ConnectorsPin Direction Genie Signal see details below External Inputs Genie Signal Electrical DetailsInput Electrical Parameter Description Value Output Electrical Parameter Description Value RJ45 LAN Ethernet Connector DetailsExternal Outputs Network Connection Network Activity Illumination Camera Status LEDOptical Considerations Light Sources Lens Modeling Magnification and ResolutionFilters Primary Points in a Lens System Electrostatic Discharge and the CCD Sensor Sensor Handling InstructionsProtecting Against Dust, Oil and Scratches Cleaning the Sensor Window Environment Ruggedized RJ45 Ethernet Cables Computer Requirements for Genie Cameras Ethernet Switch RequirementsHost PC System Ethernet to Fiber-Optic Interface Requirements EC & FCC Declaration of Conformity Problem Type Summary TroubleshootingOverview Device Available but with Operational Issues Device IP ErrorDevice Not Available Installation Issues and Functional Problems GigE Server Warning Example 1a IP error with multiple NICs GigE Server Warning Example 1b IP error with multiple NICs GigE Server Warning Example 2 Subnet Mask or IP error GigE Server Warning Example 3 Filter Driver CorSnid Disabled Device Available with Operational Issues Firmware Updates Streaming Error No Acquisition with a Timeout Message Power Failure During a Firmware Update-Now What?Disabling Windows Firewall Turning Windows Firewall Off Cabling and IP Configuration Issues Test a Genie Using Internal Test PatternsStreaming Video grab Issues Grab has Random Bad Data or Noise Grab Remains BlackGrab has Random Bad Data or Noise Case Laptop Computer Networking Issues Configuration Recommendations with Laptops Problems when Changing the Laptop NIC Multiple Camera Issues Ethernet Switch IssuesProblems with Disconnecting NICs Camera Exposure Issues No camera exposure when expected Verifying Network Parameters VPN Driver Interference Troubleshooting Genie Monochrome Series-GigE Vision Camera Genie Sales Information Dalsa Contact InformationInternational/Canada Genie Technical Support Glossary of Terms Acquiring an image frame SAT Glossary of Terms Genie Monochrome Series-GigE Vision Camera Index Genie Monochrome Series-GigE Vision Camera Index Index Genie Monochrome Series-GigE Vision Camera Genie Monochrome Series-GigE Vision Camera Index