CamExpert Image Buffer and ROI Parameters
CamExpert provides controls to configure acquisitions via the Image Buffer and ROI Parameters tab. The image buffer can be easily cropped as desired. Below is the CamExpert dialog and parameter descriptions follow.
Parameter | Description |
Pixel Format | For the Genie Monochrome series, the image buffer format is Monochrome |
Width (in Pixels) | Displays the image buffer width (X axis), in pixels. |
Height (in Pixels) | Displays the image buffer height (Y axis), in pixels. |
OffsetX (in Pixels) | Specifies the offset in X, from the left of the image, when using an ROI. The image buffer |
| width is automatically adjusted to compensate for this offset. |
OffsetY (in Lines) | Specifies the offset in Y, from the top of the image, when using an ROI. The image buffer |
| height is automatically adjusted to compensate for this offset. |
Image Flip | Enables hardware based horizontal image flip. |
|
|
Note: When operating in binning mode, the resolution is halved and the coordinate system is scaled accordingly. For instance, an OffsetX of 20 pixels at nominal resolution is equivalent to an OffsetX of 10 pixels with horizontal binning enabled.
40 • Operational Reference | Genie Monochrome |
