Faber M1600 Events, Test Image Select via Sapera LT or GenICam Applications, Sapera Callbacks

Test Image Select via Sapera LT or GenICam Applications

Sapera

Genie Sapera parameters for Image Test Patterns:

TestImageSelector = {Off = 0, Grey Horizontal Ramp = 1, Grey Vertical Ramp = 2, Grey Diagonal Ramp Moving = 3, Purity = 4}

In CamExpert, these parameters are available in the “Sensor” tab. See "Accessing Features with Sapera++ LT" on page 68.

GenICam features for Image Test Patterns:

TestImageSelector = {Off = 0, HorizontalWedge = 1, VerticalWedge = 2,

DiagonalMovingWedge = 3}

Events

Genie supports a number of events that a control application can monitor. Events provide real time notification on various stages of the acquisition sequence and of error conditions. A Sapera application registers callbacks for those events that need monitoring.

Sapera Callbacks

Two types a callbacks can be registered for events when using the Genie:

•Transfer events concerning host system buffers.

•Use the Sapera Transfer Module

•In the Sapera C library: see CorXferRegisterCallback

•In the Sapera++ library: see SapXferCallbackInfo class

•Acquisition events concerning the acquisition device, specifically the Genie camera.

•Use the Sapera Acquisition Module

•In the Sapera C library: see CorAcqRegisterCallback

•In the Sapera++ library: see SapAcqDeviceCallbackInfo class

Genie Monochrome Series-GigE Vision Camera Operational Reference • 63