Nortel Networks 10BASE-T manual Switch Configuration Menu Screen Options

Using the BayStack 410-24T 10BASE-T Switch

Table 3-5.	Switch Configuration Menu Screen Options (continued)
Option		Description
IGMP Configuration...		Displays the IGMP Configuration Menu (see “IGMP Configuration
		Menu” on page 3-72). This screen allows you to optimize IP multicast
		traffic by setting up IGMP port memberships that filter IP multicast on
		a per port basis (see “IGMP Snooping” on page 1-54 for more
		information about this feature).
Display Port Statistics		Displays the Port Statistics screen (see “Port Statistics” on page 3-79).
		This screen allows you to view detailed information about any switch
		port.
Clear All Port Statistics		Allows you to clear all port statistics.
		This option is followed by screen prompts that precede a choice of
		actions:
		• If the switch is operating standalone, choose one of the following:
		• Yes, to clear all port statistics for all switch ports
		• No, to abort the option
		• If the switch is participating in a stack configuration, choose one of
		the following:
		• Clear all port statistics for a specific unit in the stack
		• Clear all port statistics for the entire stack
		• No, to abort the option
ATM Configuration...		Appears only when an ATM MDA is installed in one of the units of your
		stack configuration. When the ATM MDA is installed, selecting this
		option displays the ATM Configuration Menu (see “ATM Configuration
		Menu” on page 3-83).
		Note: Your BayStack 410-24T switch does not support the ATM MDA
		hardware. However, if a unit in your stack (such as a BayStack 450
		switch) is configured with the ATM MDA, you can manage the ATM
		MDA from your switch. Refer to the BayStack 450 Switch’s User Guide
		for detailed information about the ATM MDA.
Return to Main Menu		Exits the Switch Configuration Menu screen and displays the main
		menu.

3-20 309985-C Rev 00