Nortel Networks 10BASE-T manual Stack Down Configuration Example

Introduction to the BayStack 410-24T Switch

1

Unit 1

In

2

1 = Base unit

2 = Last unit

O ut

3

Unit 2

Unit 3

Unit 4

Unit 5

Unit 6

Unit 7

Unit 8

4

3 = Cascade cable (PN 303978-A)

4 = Cascade max-return cable (PN 303979-A)

BS0034B

Figure 1-14. Stack Down Configuration Example

Certain network management station (NMS) applications assume a stack down configuration for the graphical user interface (GUI) that represents the stack (see Figure 1-14). For this reason, Nortel Networks recommends that you always configure the top unit in the stack as the base unit.

In any stack configuration, the following applies:

•When you apply power to the stack, the base unit initializes and the entire stack powers up as a single logical unit within 30 seconds.

•You can attach an RS-232 communications cable to the Console/Comm port of any switch in the stack.

309985-C Rev 00 1-35