Nortel Networks 10BASE-T manual Spanning Tree Port Configuration

Using the Console Interface

Spanning Tree Port Configuration

The Spanning Tree Port Configuration screen allows you to configure individual switch ports or all switch ports for participation in the spanning tree.

Note: If spanning tree participation of any trunk member is changed (enabled or disabled), the spanning tree participation of all members of that trunk is changed similarly.

Figure 3-43 and Figure 3-44 show sample port configurations for the two

Spanning Tree Port Configuration screens.

Choose Spanning Tree Port Configuration (or press c) from the Spanning Tree Configuration Menu to open the Spanning Tree Port Configuration screen.

		Spanning Tree Port Configuration
		Unit:	[ 1 ]
Port	Trunk	Participation	Priority	Path Cost	State
----	-----	-------------------	--------	---------	----------
1		[ Normal Learning ]	128	100	Forwarding
2		[ Normal Learning ]	128	100	Forwarding
3		[ Normal Learning ]	128	100	Forwarding
4		[ Normal Learning ]	128	100	Forwarding
5		[ Normal Learning ]	128	100	Forwarding
6	1	[ Normal Learning ]	128	100	Forwarding
7	1	[ Normal Learning ]	128	100	Forwarding
8		[ Normal Learning ]	128	100	Forwarding
9	1	[ Normal Learning ]	128	100	Forwarding
10		[ Normal Learning ]	128	100	Forwarding
11		[ Normal Learning ]	128	100	Forwarding
12		[ Normal Learning ]	128	100	Forwarding
13	3	[ Normal Learning ]	128	100	Forwarding
14	3	[ Normal Learning ]	128	100	Forwarding

More...

Press Ctrl-N to display choices for additional ports..

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-43. Spanning Tree Port Configuration Screen (1 of 2)

309985-C Rev 00 3-105