Toshiba 51H93 owner manual Using the StableSound feature, Using the SRS WOW surround sound feature

Chapter 8: Using the TV’s features

Adjusting the audio (continued)

Using the StableSound® feature

The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).

To turn on the StableSound® feature:

1.Press MENU and open the AUDIO menu.

2.Highlight AUDIO SETTINGS and press ENTER.

3.Press z to highlight STABLE SOUND, and then press • to select ON.

Using the SRS WOW™ surround sound feature

WOW is a special combination of SRS Labs audio technologies (SRS 3D, FOCUS, and TruBass) that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider.

To adjust the WOW settings:

1.	Put the TV in STEREO mode (see “Selecting stereo/SAP
	broadcasts” on page 76).
2.	Press MENU and open the AUDIO menu.

Audio

Audio Settings

Advanced Audio Settings Audio Setup

Audio Settings
Bass	50
Treble	50
Balance	0
SBS		On
SBS Level	50
StableSound		On
Save	Done	Reset

3. Highlight ADVANCED AUDIO SETTINGS and press

ENTER.

	Advanced Audio Settings
	SRS WOW: 3D		On
Audio	SRS WOW: Focus		On
Audio Settings	SRS WOW TruBass		High
Advanced Audio Settings	Save	Done	Reset
Audio Setup

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

To turn off the StableSound feature:

Select OFF in step 3 above.

Resetting your audio adjustments

The RESET function returns your audio adjustments to the following factory settings:

Bass	center (50)	SBS	ON
Treble	center (50)	SBS Level	70
Balance	center (0)	StableSound ...	OFF

To reset your audio adjustments:

1.Press MENU and open the AUDIO menu.

2.Highlight AUDIO SETTINGS and press ENTER.

3.Press z to highlight RESET and press ENTER.

Audio Settings
Bass	50
Treble	50
Balance	0
SBS		On
SBS Level	70
StableSound		Off
Save	Done	Reset

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

4.Press z or y to highlight the WOW feature you want to adjust, and then press x or • to adjust the item.

•3D — To turn the surround sound effect on or off.

Note: If the broadcast is monaural, the 3D effect does not work.

•Focus — To turn the vocal emphasis effect on or off.

•TruBass — To select the desired bass expansion level (HIGH, LOW, or OFF).

5.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

To reset the WOW settings:

Highlight RESET in the Advanced Audio Settings menu and press ENTER.

Advanced Audio Settings
SRS WOW: 3D		Off
SRS WOW: Focus		Off
SRS WOW TruBass		Off
Save	Done	Reset

________

SRS, WOW and the symbol are trademarks of SRS Labs, Inc.

SRS WOW technology is incorporated under license from SRS Labs, Inc.

78 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.