Toshiba 51H93 owner manual Turning off the built-in speakers, Selecting the Audio OUT sound

Chapter 8: Using the TV’s features

Adjusting the audio (continued)

Turning off the built-in speakers

Use this feature to turn off the TV speakers when you connect an audio system to your TV (see “Connecting a digital audio system” and “Connecting an analog audio system” on page 19).

To turn off the built-in speakers:

1.Press MENU and open the AUDIO menu.

2.Highlight AUDIO SETUP and press ENTER.

Selecting the AUDIO OUT sound

This feature allows you to select the audio source (MAIN or POP) that is output from the AUDIO OUT jacks.

This is useful when amplifying or recording the POP sound with external equipment while hearing the sound of the main picture through the TV’s built-in speakers.

To select the Audio OUT sound:

Audio

Audio Settings Advanced Audio Settings

Audio Setup

Audio Setup
MTS		Stereo
Language		English
Speakers		Off
Audio Out		Main
Optical Output Format		Dolby Digital
Save	Done	Reset

1.Press MENU and open the AUDIO menu.

2.Press z to highlight AUDIO SETUP and press ENTER.

Audio

Audio Settings

Advanced Audio Settings

3.Press z to highlight the SPEAKERS field, and then press • to select OFF.

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

To turn on the built-in speakers:

Select ON in step 3 above.

Audio Setup

3.Press z to highlight the AUDIO OUT field, and then press x or • to select MAIN or POP.

–MAIN: Outputs the sound of the main program through the AUDIO OUT jacks.

–POP: Outputs the sound of the POP program through the AUDIO OUT jacks.

Selecting the optical audio output format

Use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio

Audio Setup
MTS		Stereo
Language		English
Speakers		On
Audio Out		Main
Optical Output Format		Dolby Digital
Save	Done	Reset

Audio Setup
MTS		Stereo
Language		English
Speakers		On
Audio Out		POP
Optical Output Format		Dolby Digital
Save	Done	Reset

system to the OPTICAL AUDIO OUT jack on the TV (see “Connecting a digital audio system” on page 19).

To select the optical audio output format:

1.Press MENU and open the AUDIO menu.

2.Highlight AUDIO SETUP and press ENTER.

3.Press z to highlight the OPTICAL OUTPUT FORMAT field, and then press • to select either DOLBY DIGITAL or PCM, depending on your device.

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

Note:

•When the POP window is not open, the sound of the main program is output through the AUDIO OUT jacks, even if POP is selected in the AUDIO OUT menu.

•The sound of the main program is always output through the TV speakers, regardless of the AUDIO OUT setting.

Audio

Audio Settings Advanced Audio Settings

Audio Setup

Audio Setup
MTS		Stereo
Language		English
Speakers		On
Audio Out		Main
Optical Output Format		Dolby Digital
Save	Done	Reset

4.To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER.

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 79