Toshiba 51H93 Starting the Quick Connect Guide assisted setup, Selecting the menu language

5Quick Connect Guide & TV Guide On Screen™ setup

This section includes instructions on using the Quick Connect Guide to assist you in configuring the following basic settings for your TV:

–Choosing your preferred language (English, French, or Spanish) for on-screen menus. (See Chapter 7 for details on this feature.)

–Setting up the TV Guide On Screen™ interactive program guide. (See Chapter 7 for details on this feature.)

–Configuring the antenna input sources. (See Chapter 6 for details on this feature.)

–Automatically programming channels into the TV’s channel memory (See Chapter 6 for details on this feature.)

–Choosing your preferred picture mode (See Chapter 8 for details on this feature.)

Note: Review “Navigating the menu system” on the previous page.

Starting the Quick Connect Guide assisted setup

The Quick Connect Guide automatically starts the first time the TV is turned on.

Note: If you have not already connected your devices and cables to your TV, turn off your TV, unplug the power cord, and connect your devices according to the applicable connection diagram in Section 2. If you turned on the TV before connecting your devices and the Quick Connect Guide assisted setup already began, you will have to manually restart the Quick Connect Guide (see below) after you connect your devices.

If this is the first time you have turned on your TV and the Quick Connect Guide is already on-screen, start at “Selecting the menu language” at right.

If you change your TV’s input source or connections, you also can manually start the Quick Connect Guide to assist you in updating your TV’s settings. To do this, start at “Manually starting the Quick Connect Guide assisted setup” below.

Note: To stop the Quick Connect Guide, press EXIT or turn off the TV.

Manually starting the Quick Connect Guide assisted setup

1.Press MENU and open the SETUP menu.

2.Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3.)

Setup

Installation

Sleep Timer

On/Off Timer

Digital Tuner Hold • • • • • • • Off

Slide Show Interval • • • 2 Sec

Convergence

3.Open the QUICK CONNECT menu, highlight START, and then press ENTER.

Quick Connect

Start

If you already set up the TV Guide On Screen system, go to page 40.

Selecting the menu language

1.Press yzx • to highlight the language you want to use for on-screen menus and messages (English, Español, or Français), and then press ENTER.

Quick Connect Guide

Welcome to the TOSHIBA Quick Connect Guide. This Guide will take you through the initial setup of your TV.

To end Quick Connect Guide, press the EXIT key.

Please choose a language.

English Español Francais

2.Press ENTER to continue.

The TV Guide On Screen setup begins. (Continued on next page)

36 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.