Toshiba 51H93 owner manual Using the TV’s features, Selecting the video input source to view

8Using the TV’s features

Selecting the video input source to view

To select the video input source to view:

1.Press INPUT on the remote control or TV/VIDEO on the TV front panel.

2.Press 0–7 to select the input source you want to view, depending on which input jacks you used for connecting your devices (see “Connecting your TV” on pages 9–25).

The current signal source displays at the top of the INPUT SELECTION screen.

Input Selection

O : ANT 1

1 : Video 1

2 : Video 2

3 : Video 3

4 : ColorStream HD 1

5 : ColorStream HD 2

6 : DVI

7 : ANT 2

0 – 7: TO SELECT

Note:

•You also can repeatedly press the INPUT or TV/VIDEO button to select the source.

•You can label the video input sources according to the specific devices you have connected to the TV (see next page).

•To select an IEEE-1394 input source, press the TheaterNet button on the remote control (see page 45).

	+10	TheaterNet
	–
ACTION	100
MENU		THEATER
		NET
	F
	AV
	ENTER

+

PAGE

–

INPUT

TV/VIDEO

TV front panel

MENU VOLUME CHANNEL EXIT TV/VIDEO TouchFocus

Using the digital tuner hold

The digital tuner hold helps to protect the digital tuner’s signal when you record a digital signal. If you are recording to a D-VHS device, the digital tuner hold is automatically activated. If you are recording to an analog VCR using the REC OUT jacks, you need to manually turn on the digital tuner hold.

To manually turn on the digital tuner hold:

1.Press MENU and open the SETUP menu.

2.Highlight DIGITAL TUNER HOLD and press ENTER.

3.Highlight ON and press ENTER.

Setup

Installation

Sleep Timer

On/Off Timer

Digital Tuner Hold • • • • • • • Off Off

Slide Show Interval • • • 2 Sec On

Convergence

To turn off the digital tuner hold:

Highlight OFF in step 3 above.

Note:

•If you turn ON the digital tuner hold when ANT 1 is the selected input source, you cannot change to the ANT 2 input source, and vice versa.

•When ANT 2 is the selected input source, if you manually turn on the digital tuner hold and then open the TV Guide On Screen system, the Video Window may not display a picture. If this happens and you want to use the TV Guide On Screen system, turn off the digital tuner hold and select ANT 1 or VIDEO 1 as the input source.

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 61