Toshiba 51H93 Using CableClear DNR digital noise reduction, Selecting the color temperature

Chapter 8: Using the TV’s features

Adjusting the picture (continued)

Using CableClear™ DNR (digital noise reduction)

The CableClear digital noise reduction feature allows you to reduce visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing back a video cassette or disc damaged by repeated use.

Note: The CableClear DNR feature does not function in DVI, ATSC, digital Cable, VIDEO, and ColorStream modes.

To turn on CableClear DNR:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Press z to highlight the CABLECLEAR DNR field, and then press • to select AUTO.

Selecting the color temperature

You can change the quality of the picture by selecting from three preset color temperatures: cool, medium, and warm, as described below.

Mode Picture Quality

cool blueish medium neutral

warm reddish

To select the color temperature:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Press z to highlight the COLOR TEMPERATURE field, and then press • to select the mode you prefer (COOL, MEDIUM, or WARM).

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Advanced Settings
ALS		On
Flesh Tone		On
CableClear DNR		Auto
Color Temperature		Cool
Save	Done	Reset

Video

Picture Settings

Theater Settings

Advanced Picture Settings

Advanced Settings
ALS		On
Flesh Tone		On
CableClear DNR		Off
Color Temperature		Cool
Save	Done	Reset

4.To temporarily save the new settings, highlight DONE and press ENTER.

To permanently save the new settings, highlight SAVE and press ENTER.

To turn off CableClear DNR:

Select OFF in step 3 above.

4.To temporarily save the new settings, highlight DONE and press ENTER.

To permanently save the new settings, highlight SAVE and press ENTER.

Resetting the advanced picture settings

To reset the advanced picture settings to their factory values:

1.Press MENU and open the VIDEO menu.

2.Highlight ADVANCED PICTURE SETTINGS and press

ENTER.

3.Highlight RESET and press ENTER.

	Advanced Settings
	ALS		Off
Video	Flesh Tone		Off
Picture Settings	CableClear DNR		Auto
Theater Settings	Color Temperature		Cool
Advanced Picture Settings	Save	Done	Reset

4. Highlight SAVE and press ENTER.

74 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.