Toshiba 51H93 owner manual Cable box code testing, Configuring your VCR setup

Chapter 5: Quick Connect Guide & TV Guide On Screen setup

Setting up the TV Guide On Screen system (continued)

4.Read the on-screen information about the Cable box to G-LINK connection, and then press ENTER.

For G-LINK connection details, see page 25.

5. Highlight your Cable box brand, and then press ENTER.

Cable box code testing

1.To allow the TV Guide On Screen system to find the correct code for your brand of Cable box, tune your Cable box to channel 02, leave the Cable box and TV ON, and then press ENTER.

2.When testing is done, if your Cable box tuned itself to channel 09, select YES and press ENTER. Go to “Configuring your VCR setup” below.

If your Cable box did not tune itself to channel 09 and you want to test the

same code again, select TEST THIS CODE AGAIN and press ENTER.

If your Cable box did not tune itself to channel 09 and you want the Guide to search for the correct code, select NO and press ENTER. Go to step 3.

3.If the correct code is not found, the following screens appear, with helpful hints for finding the code.

Configuring your VCR setup

1.Do you have a VCR? Select YES or NO, and then press

ENTER.

The TV Guide On Screen system will test the code for the brand of Cable box you selected. Do not press any keys on the TV, remote control, or Cable box until the testing process is done.

2.Read the on-screen information about the VCR to G-LINK connection, and then press ENTER to continue.

For G-LINK connection details, see page 25.

(Continued on next page)

38 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.