Nikon COOLPIXP510RED Autofocus mode, E51, Focuses even when the shutter-release button is not

j, k, l, m Modes (Setting the Exposure for Shooting)

	Option	Description	A
		When Single AF (default setting) is selected, the camera
		focuses only while the shutter-release button is pressed
	Autofocus mode	halfway. When Full-time AF is selected, the camera	E51
		focuses even when the shutter-release button is not
		pressed halfway. You may hear the sound of the camera
		focusing.
	Flash exp. comp.	Adjust the flash output. Use this option when the flash is	E52
		too bright or too dark. The default setting is 0.0.
	Noise reduction	Set the strength of the noise reduction function that is	E52
		normally performed when recording the picture. The
	filter
		default setting is Normal.
	Active D-Lighting	Prevent loss of contrast details in highlights and shadows	E53
		when shooting images. The default setting is Off.
	Save user settings	The current settings are stored in mode dial M (A63).	64
Shooting	Reset user settings	The settings saved to mode dial M are reset.	64
		When the zoom control is operated when set to On, the
		camera changes in steps to the focal length (equivalent to
Features		35mm [135] format of angle of view) of the zoom lens that
	Zoom memory	is set in advance.	E54
		• Select On and press the kbutton to display the screen
		for focal length selection. Press the kbutton to switch
		the On [w]/Off setting, then press the multi selector K
		to apply the selection.
	Startup zoom	When the camera is turned on, the zoom position moves
		to the focal length (equivalent to 35mm [135] format of	E54
	position 2	angle of view) of the zoom lens that is set in advance. The
		default setting is 24 mm.

1The setting menu can also be displayed by pressing the w(FUNC) button during shooting. Select the Fn button function in the setup menu (A108), and then assign a setting menu

to be displayed when the w(FUNC) button is pressed.

2This function cannot be set when using M mode.

CMore Information

See “Note on the Command Dial Operation When Menus are Displayed” (A14) for more information.

CFeatures That Cannot Be Used Simultaneously

62This feature may not be used in combination with certain features (A80).