Nikon COOLPIXP510BLK manual Vibration Reduction, E80, Caused by camera shake, Default setting

The Setup Menu

Vibration Reduction

Press the dbutton Mztab (A13) MVibration reduction

	Option	Description
		Compensate camera shake that commonly occurs when
		shooting at the telephoto zoom position or slow shutter speed.
		Camera shake is also compensated when recording movies as
	On	well as when shooting still images. The camera automatically
g		detects the panning direction and only compensates for vibration
	(default setting)	caused by camera shake.
		When the camera is panned horizontally, for example, vibration
		reduction only reduces vertical shake. If the camera is panned
		vertically, vibration reduction only compensates for horizontal
		shake.
k Off		Vibration Reduction is not enabled.

•When using a tripod to stabilize the camera, set vibration reduction to Off. When On is selected, an icon for this setting is displayed on the monitor (A8).

Reference Section

BNotes on Vibration Reduction

•After the power is turned on or the camera enters shooting mode from playback mode, wait until the display stabilizes before shooting.

•Due to the characteristics of the vibration reduction function, images displayed on the monitor immediately after shooting may appear blurry.

•Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations.

•When the Night landscape or Night portrait scene mode is set to Tripod, vibration reduction is turned Off.

E80