Nikon COOLPIXP510BLK, COOLPIXP510RED manual Setup Menu, 108, Panorama assist, or 3D photography

General Camera Setup

The Setup Menu

Press the dbutton Mz(setup) tab (A13)

From the menu screen, select the z tab to display the setup menu, and then you can change the following settings.

Set up

Welcome screen

Time zone and date

Monitor settings

Print date

Vibration reduction

Motion detection

AF assist

	Option	Description	A
		Select the image displayed as the welcome screen
		when the camera is turned on. Select COOLPIX to
	Welcome screen	display the COOLPIX logo. Select Select an image to	E74
		use a picture taken with the camera as the welcome
		screen. The default setting is None.
		Set settings related to the camera’s date and time. The
		Time zone setting allows you to specify the time zone
General	Time zone and date	where the camera is mainly used and whether or not	E75
		destination is set, the camera automatically calculates
Camera		daylight saving time is in effect. When the xtravel
		the time difference between the travel destination and
		the whome time zone, and saves images using the
Setup		date and time of the travel destination.
	Monitor settings	Set the image display after shooting, the screen
		brightness and whether or not to display a framing grid	E78
		or histograms on the monitor.
		Imprint the shooting date and time on pictures at the
		time of shooting. The default setting is Off.
		• Dates cannot be imprinted in the following
		situations.
	Print date	- When the scene mode is set to Easy panorama,	E79
		Panorama assist, or 3D photography
		- When Pre-shooting cache, Continuous H: 120
		fps or Continuous H: 60 fps is selected for
		Continuous (A61) in the shooting menu
		- During movie recording
		Reduce blurring caused by camera shake when
		shooting. The default setting is On.	E80
	Vibration reduction	• When using a tripod to stabilize the camera, set this
		feature to Off to prevent this feature from
		malfunctioning.

108