Nikon COOLPIXP510BLK, COOLPIXP510RED manual Playback Issues, F13

Troubleshooting

Playback Issues

Problem		Cause/Solution	A
	• File was overwritten or renamed by computer or another		–
File cannot be	•	make or model of camera.
		File cannot be played back during interval timer shooting.	61
played back.
	• Movies recorded with cameras other than COOLPIX P510		96
		cannot be played back.
Cannot play a	• Pictures shot continuously with cameras other than COOLPIX		–
		P510 cannot be played as a sequence.
sequence.
	• Check the Sequence display options setting.		89, E63
	• Playback zoom cannot be used with movies, small pictures, or		–
	•	cropped copies of size 320 × 240 pixels or smaller.
Cannot zoom in on		Playback zoom may not be available for pictures taken with	–
picture.		cameras other than COOLPIX P510.
	• 3D pictures cannot be enlarged when the camera is		E8
		connected via HDMI and they are played back in 3D.
Cannot record or	• Voice memos cannot be attached to movies.		100
	• Voice memos cannot be attached to pictures taken with		88
play back voice
		cameras other than COOLPIX P510, and voice memos
memo.
		recorded by other cameras cannot be played back.
Pictures and	• Confirm the conditions that are required for editing pictures or		E16
		movies.	E31
movies cannot be
	• Pictures and movies taken with cameras other than COOLPIX		–
edited.
		P510 cannot be edited.
	• Video mode or HDMI is not correctly set in the TV settings		110,
Pictures are not	•	setup menu.	E86
		Cables are connected to both the HDMI mini connector and	90
displayed on	•	USB/audio video connector.		Technical
television.		memory.	22
		Memory card contains no pictures. Replace memory card.
		Remove memory card to play back pictures from internal
				Notes
	•	Camera is off.	25
	•	Battery is exhausted.	24	and
Nikon Transfer 2	•	USB cable is not correctly connected.	90
does not start	•	Camera is not recognized by the computer.	–	Index
when camera is	•	Confirm that the operating system used is compatible with	91
connected to a	•	the camera.
computer.		Computer is not set to launch Nikon Transfer 2 automatically.	94
		For more information on Nikon Transfer 2, refer to help
		information contained in ViewNX 2.
The PictBridge	With some PictBridge-compatible printers, the PictBridge startup
startup screen is
	screen may not be displayed and it may be impossible to print
not displayed			110,
	images when Auto is selected for the Charge by computer
when the camera			E88
is connected to a	option. Set the Charge by computer option to Off and
	reconnect the camera to the printer.
printer.

F13