Nikon COOLPIXP510BLK, COOLPIXP510RED manual Auto or Fixed range auto is selected

j, k, l, m Modes (Setting the Exposure for Shooting)

Option	Description	A
	Adjust colors in the image closer to the colors as they
	appear to the eye. Although Auto (normal) (default
	setting) can be used under most types of lighting, you can
White balance 1	apply the white balance setting suited to the sky	E38
	conditions or light source to achieve better results if the
	default setting results are unsatisfactory.
	• The preset value for preset manual applies commonly to
	j, k, l, m, M shooting modes.
	Select the method that the camera uses to measure the
Metering 1	brightness of the subject. The camera adjusts the	E40
	exposure, which is a combination of shutter speed and
	aperture value, based on the brightness measurement. The
	default setting is Matrix.
	Set the mode used for taking a series of pictures.
	• The default setting is Single (i.e. only one picture is
	captured at a time).		Shooting
	• When Continuous H, Continuous L, Pre-shooting
	cache, or BSS (A50) is set, the pictures are shot
	continuously while the shutter-release button is fully
Continuous 1	held down.	E41	Features
	• If Continuous H: 120 fps, Continuous H: 60 fps, or
	Multi-shot 16 is set, the specified number of pictures
	are shot continuously when the shutter-release button is
	fully held down.
	• If the Intvl timer shooting is set, the pictures are shot
	continuously at the set interval of 30 s, 1 min, 5 min, or
	10 min when the shutter-release button is fully held
	down once.
	Higher ISO sensitivity allows you to take pictures of darker
	subjects. Additionally, even with subjects of similar
	brightness, pictures can be taken at faster shutter speeds,
ISO sensitivity 1	and blurring caused by camera shake and subject
	movement can be reduced. When ISO sensitivity is set to	E45
	Auto (default setting), the camera sets the ISO sensitivity
	automatically.
	• In m (manual) mode, ISO sensitivity is fixed at ISO 100 if
	Auto or Fixed range auto is selected.
Exposure	The exposure (brightness) can be changed automatically	E46
bracketing	during continuous shooting. The default setting is Off.
	Set how the camera determines the focus area using the
AF area mode 1	autofocus to Face priority, Auto (default setting),	E47
	Manual, Center, Subject tracking or Target finding
	AF.

61