Nikon COOLPIXP510RED, COOLPIXP510BLK manual BElectronically Controlled Cameras

Troubleshooting

Problem	Cause/Solution	A
Date not	• A shooting mode that does not support print date is selected.
appearing on		108, E79
pictures even	• Another function that is set now is restricting the print date.	80
when Print date is	• The date cannot be imprinted onto a movie.	–
enabled.
Screen for setting
time zone and
date is displayed	Clock battery is exhausted; all settings were restored to their
when camera is		27
	default values.
turned on.
Camera settings
reset.
Reset file	Reset file numbering cannot be applied when the folder	110,
numbering	number reaches 999 and there are images in the folder. Change	E90
cannot be done.	the memory card, or format the internal memory/memory card.
Monitor is turned	Battery temperature is high. Turn off camera, and allow battery to
off, and the power-	cool down before resuming use. After the lamp flashes for three	25
on lamp flashes	minutes, the camera turns off automatically, but you can also
quickly.	press the power switch to turn it off manually.
	When functions such as movie recording or sending images
Camera	using an Eye-Fi card are used for a long time, or when the camera	97
temperature rises.	is used in a location with a high ambient temperature, the
	camera temperature may rise. This is not a malfunction.

bElectronically Controlled Cameras

In extremely rare instances, unusual characters may appear on the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. Note that disconnecting the power source as described above may result in the loss of any data not recorded on the internal memory or memory card at the time the problem occurred. Data already recorded is not affected. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative.

Technical Notes and Index

F9