Nikon COOLPIXP510RED Programmed auto E10, Shutter-priority auto E10, Aperture-priority auto E10

j, k, l, m Modes (Setting the Exposure for Shooting)

j (Programmed auto) (E10)

Use for automatic control of the exposure by the camera.

•Different combinations of shutter speed and aperture value can be selected without changing the exposure by rotating the command dial during shooting (“flexible program”). While flexible program is in effect, a flexible program mark (A) is displayed next to the mode indicator (j) in the upper left of the monitor.

		25m 0s
1/250	F5.6	840

•To cancel flexible program, rotate the command dial until the flexible program mark (A) is no longer displayed. Selecting another shooting mode, or turning off the camera, also cancels flexible program.

k(Shutter-priority auto) (E10)

Use to shoot fast moving subjects with a fast shutter speed, or use to emphasize the movements of a moving subject with a slow shutter speed.

•The shutter speed can be adjusted by rotating the command dial.

l(Aperture-priority auto) (E10)

Use to blur the background or bring both the foreground and background into focus.

•The aperture value can be adjusted by rotating the multi selector.

		25m 0s	Shooting
1/250	F5.6	840	Features

		25m 0s
1/250	F5.6	840

m(Manual) (E11)

Use to control the exposure according to shooting
requirements.
• When adjusting the aperture value or shutter speed,
the degree of deviation from the exposure value
measured by the camera is displayed in the exposure	25m 0s
indicator. The degree of deviation in the exposure	1/250 F5.6 840
indicator is displayed in EVs (–2 to +2 EV in	Exposure indicator
increments of 1/3 EV).

•The shutter speed can be adjusted by rotating the command dial and the aperture value can be adjusted by rotating the multi selector.

59