Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

You can shoot pictures with a flash by raising the flash. You can set a flash mode that suits the shooting conditions.

1 Press the m(flash pop-up) button to raise the flash.

When the flash is lowered, the flash mode is fixed at W

(off).

Shooting Features

2 Press H (m flash mode) on the multi selector.

3 Use the multi selector to select the desired mode and press the kbutton.

See “Available Flash Modes” (A67) for more information.

If the kbutton is not pressed within a few seconds,

the selection will be canceled.

Auto

When U(auto) is applied, Dis only displayed for

a few seconds even if monitor indicators (A15) are turned on.

4 Frame the subject and take a picture.

The flash lamp indicates the status of the flash when the shutter-release button is pressed halfway.

- On:

The flash will fire when you press the

 

shutter-release button all the way.

-Flashing: The flash is charging. The camera cannot take pictures.

- Off:

The flash will not fire when a picture is

 

taken.

If the battery is low, the monitor will be turned off while the flash is charging.

66

Page 84
Image 84
Nikon COOLPIXP510BLK, COOLPIXP510RED Using the Flash Flash Modes, Press the mflash pop-up button to raise the flash