INFORMATION
CONTROL PANEL FEATURES
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and
function follow later in this Owner’s manual.
English
Español
. BAKE PAD: Press to select the bake function.
. BROIL PAD: Press to select the broil function.
. CONVECTION BAKE PAD: Press to select baking
with the convection function.
. CONVECTION ROAST PAD: Press to select roasting with the convection function.
. NUMBER PADS: Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the start time and length of operation for timed baking.
. START PAD: Must be pressed to start any cooking or cleaning function.
. CLEAR/OFF PAD: Press to cancel all oven
operations except the clock and timer.
. CLOCK PAD: Press before setting the time of day.
. TIMER ON/OFF PAD: Press to select the timer feature.
. COOK TIME PAD: Press and then use the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.
. START TIME PAD: Use along with BAKE, CONV. BAKE, CONV. ROAST, COOK TIME, and SELF CLEAN pads to set the oven to start and stop automatically at a time you set.
. COOK & WARM PAD: Press to keep cooked foods warm. See the how to set the oven for warming section.
. PROOF PAD: Press to select a warm environment useful for rising
. SELF CLEAN PAD: Press to select
. OVEN LIGHT PAD: Press to turn the oven light on or off.
. DISPLAY: Shows the time of day, oven temperature, whether the oven is in the bake, broil or
Note: If F– and a number appear in the display and the oven control signals, this indicates a function error code.
See page 32.
Press the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation.
If the function error code repeats, disconnect the power to the oven and call for service.
If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.
The time of day will flash and PF will appear in the display when there has been a power outage.
- 14 -