OPERATION
SETTING THE CLOCK
The CLOCK pad is used to set the clock. The clock has been preset at the factory for 12 hours operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will show with power failure PF. You can make a choice between
To set the clock (example below for 1:30):
1. Press CLEAR/OFF.
2. Press CLOCK.
3.Press 1, 3, and 0 to set the time of day to 1:30.
4.Press START.
The clock will start.
MINIMUM & MAXIMUM CONTROL PAD SETTINGS
All of the features listed have minimum and maximum time or temperature settings that may be entered into the control. An entry acceptance beep will sound each time a control pad is pressed.
An entry error tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature.
FEATURE | MIN. TEMP. | MAX. TEMP. | |
/TIME | /TIME | ||
| |||
BAKE TEMP. | 170°F / 75°C | 550°F / 285°C | |
BROIL TEMP. | LO (400°F) | HI (550°F) | |
SELF CLEAN TIME | 2 hours | 4 hours | |
CONVECTION BAKE/ | 300°F / 150°C | 550°F / 285°C | |
CONVECTION ROAST |
|
| |
COOK & WARM | 170°F (75°C) / 3 hours | ||
RADIANT ELEMENT | Default: 12 Hr. | ||
WARMING ZONE | Default: 2 Hr. | ||
PROOF | Default: 12 Hr. | ||
SETTING THE TIMER ON/OFF
The TIMER ON/OFF serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The TIMER ON/OFF feature can be used during any of the other oven control functions.
To set the Timer (example for 5 minutes):
1.Press TIMER ON/OFF twice.
0:00 and HR inside O will appear and TIMER will flash in the display.
2. Press the number pads to set the desired time in the display (press 5).
If you make a mistake press the TIMER ON/OFF and begin again.
3.Press TIMER ON/OFF. The time
will count down with 5:00 and TIMER will show in the display.
Note: If TIMER ON/OFF is not pressed, the timer will return to the time of day.
4.When the set time has run out, End will show in the display. The clock will sound with 3 beeps every 15 seconds until TIMER ON/OFF is pressed.
Note: If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF.
Note:
1.If you press TIMER ON/OFF once, it allows you to set the time in seconds.
(for example: if you press 5 and 6, it means 56 seconds)
2.If you press TIMER ON/OFF twice, it allows you to set the time in minutes.
(for example: if you press 5 and 6, it means 56 minutes)
To cancel the Timer before the set time has run out:
1.Press TIMER ON/OFF once. The display will return to the time of day.
English
Español
- 15 -
