MAINTENANCE
CARE &CLEANING
Changing the Oven Light
The oven light is a standard
To replace:
• Make sure oven and bulb are cool.
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven counterclockwise to remove.
3.Turn bulb counterclockwise to remove from socket.
4.Replace bulb and bulb cover by turning clockwise.
5.Plug in range or reconnect power.
Stainless Steel Surfaces (on some
models)Do not use a steel-wool pad; it will scratch the surface.
1.Shake bottle well.
2.Place a small amount of Stainless Steel Appliance Cleaner or polish on a damp cloth or damp paper towel.
3.Clean a small area, rubbing with the grain of the stainless steel if applicable.
4.Dry and buff with a clean, dry paper towel or soft cloth.
5.Repeat as necessary.
Note: If a mineral
English
Español
WARNING
•Before replacing your oven light bulb, DISCONNECT the electrical power to the range at the main fuse or circuit breaker panel.
-Failure to do so can result in severe personal injury,death or electrical shock.
•Make sure oven and bulb are cool.
WARNING
• DO NOT step or sit on the door and install the
- The range could be tipped and injury might result from spilled hot liquid, food, or the range itself.
- If the range is pulled away from the wall for cleaning, service, or any other reason, ensure that the
Painted and Body Parts, and Decorative Trim
For general cleaning, use a cloth with hot and soapy water. For more difficult soils and
Broiler Pan and Grid
Do not clean the broiler pan or grid in a self- cleaning mode.
After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease
from the pan into a proper container.
Wash and rinse the broiler pan and grid in hot water with a
If food has burned on,sprinkle the grid with cleaner while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove
Both the broiler pan and grid may be cleaned with a commercial oven cleaner.
Both the broiler pan and grid can also be cleaned in a dishwasher.
Oven Racks
Remove the oven racks before operating the Self-
Clean cycle. Leaving the racks in place could cause
discoloration, and, if food is spilled into the tracks,
could causes the racks to become stuck. If left, clean by using a mild, abrasive cleaner. Rinse with clean water and dry.
If the racks are cleaned in the
- 28 -