AT&T 518-455-317 manual Press Feature 0 0 System Program System Program # 3 1

Valid Entries

1 = Assigned

2 = Not Assigned ✔

Programming

To change the Voice Interrupt On Busy setting for an extension:

1 . Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 1 ] [ 2 ].

2 . Enter the number of the extension to be programmed with this feature.

3 . To assign or unassign Voice Interrupt On Busy, press [ Next Data ] until the appropriate value displays.

4 . Select another procedure or exit programming mode.

Using

To initiate a voice interrupt on busy call:

1 . From a system phone, press [ Intercom ].

2 . Press [ ✳ ] plus a two-digit extension number (or use an Auto Dial Button).

3 . Listen for one of the following responses:

■If you hear one beep, you have reached an idle system phone. You can speak after the beep.

Your voice is heard through the other extension's speaker. If the recipient is present, he or she can reply.

■If you hear two beeps, you have reached a busy system phone with Voice Interrupt On Busy Assigned. You can speak after the beeps.

If the recipient has a Voice Interrupt On Busy Talk-Back button, wait for a response. If you hear a second set of beeps, the recipient has ended the voice interrupt on busy call. In either case, hang up to end your part of the voice interrupt on busy call.

■If you hear ringing, you have reached a standard phone, an idle MLC-6 cordless phone, or a busy system phone with Voice Interrupt On Busy Not Assigned. Your call is not completed until someone answers.

5-156Voice Interrupt On Busy (#312)