AT&T 518-455-317 manual System Time #103, Description

System Time (#103)

Description

This System Programming procedure sets the time that appears on system display phones.

Considerations

■Enter the time in 24-hour notation. In this scheme, the hours of the day are 0000 (12 midnight) to 2359 (11:59 p.m.). Since each time must have four digits, use leading zeros when necessary. For example, to set the time to 9:00 a.m., enter [ 0 ] [ 9 ] [ 0 ] [ 0 ]. For 4:45 p.m., enter [ 1 ] [ 6 ] [ 4 ] [ 5 ].

■The time appears on system display phones as a.m. or p.m. (not in 24-hour notation).

Programming

To change the System Time:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 3 ].

2.Enter a new time in 24-hour notation. For example, to set the time to 2:15

p.m., press [ 1 ] [ 4 ] [ 1 ] [ 5 ]. The display reads:

System Time

Data 1415

This time appears on system display phones as 2:15p.

3.Select another procedure or exit programming mode.

System Time (#103) 5-143