AT&T 518-455-317 manual To assign a name to an extension

Programming

To assign a name to an extension:

1 . Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].

2.Enter the number of the extension to be programmed. For example, to program extension 12, press [ 1 ] [ 2 ].

3.Press left [ Intercom ]. For extension 12, the display reads:

12 Enter name

If a name was previously assigned to this extension, it displays instead.

4 . Enter the two-digit code for each character you want to enter. (See Table 5-1for codes.) For example, to enter the name Andy, press [ 2 ][ 1 ] [ 6 ][ 2 ] [ 3 ][ 1 ]

[ 9 ][ 3 ]. The display reads:

12 ANDY

5.If you make a mistake, you can press [ Mic ] to clear the display. Repeat Step 4 to enter the correct name.

6.Program a button for this extension or exit programming mode.

Extension Name Display 5-67