![](/images/new-backgrounds/1272848/272848179x1.webp)
Allowed List Assignments (#408)
Description
This System Programming procedure lets you assign up to four Allowed Phone Number Lists to specified extensions.
Related Features
You must use Allowed Phone Number Lists (#407) to create up to four lists of allowed telephone numbers before you use this procedure.
Valid Entries
1 = Assigned to extension
2 = Not Assigned to extension ✔
Programming
To assign Allowed Phone Number Lists to an extension:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 8 ]. The
display reads:
AllowTo
Extension:
2.Enter the number of the extension to be programmed. For example, to program extension 27, press [ 2 ] [ 7 ]. The display reads:
AllowTo 27 List No:
3.Enter the list number
4.To assign or unassign the list, press [ Next Data ] until the appropriate value displays.
5.At this point:
■To assign or unassign another list to this extension, press [ Next Item ] or [ Prev Item ] until the list number shows on the display. Then repeat Step 4.
■To program another extension, press [ Next Procedure ] [ Prev Procedure ] and begin at Step 2.
6.Select another procedure or exit programming mode.
Allowed List Assignments(#408) |