Using

System Phone

1.Set up the call to the first party. (You can call the party, pick up the call from hold, or answer an incoming call.)

You are connected with the first party.

2.Press [ Conf ].

The first party is now on hold.

3.Set up the call to the second party.

You are connected with the second party. If you are adding an intercom extension to a call, you must wait until the party answers.

4.Press [ Conf ] again to add the second party to the call. You can now speak with the first and second parties.

5.Repeat Steps 2 through 4 to add one or two more parties.

Standard Phone

1.Set up the call to the first party. (You can call the party, pick up the call from hold, or answer an incoming call.)

You are connected with the first party.

2.Press the switchhook down once rapidly.

The first party is now on hold. You hear intercom dial tone.

3.To add an outside party, dial [ 9 ] plus the outside number. If the number is busy or does not answer, hang up and the first party rings back.

To add an inside party, dial the two-digit extension number. If the extension is busy or does not answer, press the switchhook down once rapidly and you are reconnected with the first party.

4.When the second party answers, press the switchhook down once rapidly. You are now connected with both parties.

Conference Calls 5-37

Page 120
Image 120
AT&T 518-455-317 manual You are connected with the first party