![](/images/new-backgrounds/1272848/272848313x1.webp)
Valid Entries
1=
2=
3=
Assigned (for hunting to groups
Not Assigned ✔
VMS Line Cover (available only for Hunt Group 7)
Programming
1 . | Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 2 ] [ 0 ] [ 6 ]. | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 . At the Group: prompt, enter a group number
3.
4.
At the Line: prompt, enter the line to be programmed. For example, to select line 1, press [ 0 ] [ 1 ].
To assign or remove a line for groups
VMS Line Cover for group 7, press [ Next Data ] until the appropriate value displays.
5 .
6 .
At this point:
■To program another line, press [ Next Item ] or [ Prev Item ] until the line number shows on the display. Then repeat Step 4.
■To program another group, press [ Next Procedure ] [ Prev Procedure ], enter a new group number, and repeat Steps 3 and 4.
Select another procedure or exit programming mode.