Programming
To identify the types of outgoing calls that can be made on all lines at an extension:
1 . | Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 1 ]. | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.At the Extension: prompt, enter the number of the extension to be programmed. For example, to select extension 30, press [ 3 ] [ 0 ].
3.To change the type of call restriction, press (Next Data) until the appropriate value displays.
4 . | To program another extension, press [ Next Item ] or [ Prev Item ] until the extension |
| number shows on the display. Then repeat Step 3. |
5 . | Select another procedure or exit programming mode. |
