![](/images/new-backgrounds/1272848/272848233x1.webp)
Caller ID Name Display (F16)
Description
This feature lets users with system display phones toggle the display between Caller ID number and Caller ID name. Caller ID name is an optional feature of the Caller ID service provided by your local telephone company and may not be available in your area (even if Caller ID number is available).
Related Features
■To view Caller ID information for a second call, while active on a call, users can program Caller ID Inspect onto a button.
■Refer to Caller ID for details on Caller ID information.
Considerations
■This feature must be programmed on a button with Iights on a system display phone. When Caller ID Name Display is on, the green light is on, indicating that the Caller ID name will be displayed rather than the Caller ID number.
■SMDR reports print only Caller ID number (where available). (If a number is not available, it is reported as “IN” on the call report.)
Programming
To program a Caller ID Name Display button:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed with this feature.
3.Press a programmable button with lights.
4.Press [ Feature ] [ 1 ] [ 6 ].
5.Program another button for this extension or exit programming mode.
Using
Press the programmed button to turn Caller ID Name Display on; press it again to turn it off. Use the button like a