Message Light On (F09XX)
Description
This feature turns on the message light at a specified extension (where XX is an extension number from
Related Features
For instructions on turning off the message light, see Message Light Off.
Considerations
■This feature turns on the message light on system phones and standard phones that have message lights. (See “Standard Telephones” in Chapter 1 for a list of standard phones that have message lights.) Any type of phone can turn on or off a message light.
■For message waiting capability, standard phones with message waiting lights must be connected to an R3.1 206 module and the system must be equipped with an R3.1 primary processor module.
■Do not use this feature for an extension that is covered by the voice messaging system. The voice messaging system automatically turns on the message light at a subscriber’s extension when a message is left in the mailbox.
■If you use this feature to signal someone at a doorphone extension, you must use Message Light Off to turn the light off.
■You can program a Message Light On button on a system phone to turn the message light on at a specific extension with one touch.
Programming
To program a Message Light On button:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed with this feature.
3.Press a programmable button.
4.Press [ Feature ] [ 0 ] [ 9 ].
5.Optionally, dial the
destination, or skip to Step 6 if you want only the feature code on the button.
6.Program another button for this extension or exit programing mode.
