Loudspeaker Paging (I70)
Description
This feature accesses the loudspeaker paging system, if you have one connected to the system through the PAGE jack on the primary processor module.
Related Features
You can specify the loudspeaker paging system as a hotline alert extension so that the hotline phone can be used to make announcements over the loudspeaker. For more information, see Hotline (#603).
Considerations
You can program a Loudspeaker Paging button on a system phone to access the loudspeaker with one touch.
Programming
To program a Loudspeaker Paging button:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed with this feature.
3.Press a programmable button.
4.Press left [ Intercom ] [ 7 ] [ 0 ].
5.Program another button for this extension or exit programming mode.
Using
System Phone
To make an announcement over the loudspeaker paging system:
1 . Press the programmed button and lift the handset, or lift the handset and press [ Intercom ] [ 7 ] [ 0 ].
2.Speak into the handset. (To avoid feedback, do not use the speakerphone.) Your voice is heard through the loudspeaker system.
If your paging system supports announcements to zoned areas, refer to the instructions packaged with the device to make zoned announcements.
