AT&T 518-455-317 manual 160Wake Up Service Button #115

Programming

To program a Wake Up Service button at extension 10:

1.

2.

Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 1 ] [ 5 ].

At this point:

■If you want to assign Wake Up Service to the first available button on the system phone, press [ Next Data ] until the display reads:

Wake Up Button

1Assigned-Ext10

■If you want to remove the Wake Up Service button assignment, press [ Next Data ] until the display reads:

Wake Up Button

2Not Assigned

■If you want to assign Wake Up Service to a specific button, press [ 3 ]. The display reads:

Wake Up Button

3 Select Button

Then press a programmable button with lights to assign Wake Up Service to that button.

3 . Select another procedure or exit programming mode.

4 . Label the Wake Up Service button at extension 10.

Using

To schedule a wake up call for a specific extension:

1 . Press the Wake Up Service button on extension 10.

The green light next to the Wake Up Service button flutters. Wake Up Service is activated and the display reads:

Wake Up

2 . Dial the two-digit extension number of the desired extension (or use an Auto Dial button). For example, to schedule a wake up call for extension 32, press [ 3 ] [ 2 ]. The display reads:

Wake Up 32 --:--

3 . Enter the wake-up time in 24-hour notation. For example, to set the time to 2:15 p.m., press [ 1 ] [ 4 ] [ 1 ] [ 5 ]. When you have finished entering the time, the display reads:

Wake Up 32 14:15

The wake up call is scheduled, and the green light next to the Wake Up Service button turns off.

5-160Wake Up Service Button (#115)