Valid Entries
1 = Assigned to group
2 = Not Assigned to group ✔
Programming
To assign extensions to a Hunt Group:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 5 ] [ 0 ] [ 5 ].
2.At the Group: prompt, enter a group number
group 1, press [ 1 ]. The display reads:
Hunt Group 1
Extension:
3.Enter the number of the extension to be programmed. For example, to select extension 31, press [ 3 ] [ 1 ].
4.To assign or unassign the extension, press [ Next Data ] until the appropriate value displays.
5.At this point:
■To assign or unassign another extension, press [ Next Item ] or [ Prev Item ] until the extension number shows on the display. Then repeat Step 4.
■To program another group, press [ Next Procedure ] [ Prev Procedure ], enter a new group number, and repeat Steps 3 and 4.
6.Select another procedure or exit programming mode.
Hunt Group Extensions (#505) |
