AT&T 518-455-317 manual Program Ext

Valid Entries

Any phone number—up to 20 characters consisting of the digits 0–9, [ ✳ ], [ # ], and special dialing functions that you can access by pressing [ Hold ] (Pause), [ Mic ] (Stop), [ Spkr ] (Recall), and [ Transfer ] (Touch-Tone Enable)—assigned to codes 20 through 79

No number assigned to any code ✔

Programming

To program System Speed Dial numbers:

1.Press [ Feature ] [ 0 ] [ 0 ]. The display reads:

Program Ext 10

2.Assign a two-digit code to the number by pressing [ Feature ] and two digits

between 20 and 79. For example, to assign code 20, press [ Feature ] [ 2 ] [ 0 ].

If a number is already assigned to the code, it appears on the display. If no number is assigned to the code, the display reads:

Blank

3. Enter the number. For example, to program 555 4757, Press [ 5 ] [ 5 ] [ 5 ] [ 4 ] [ 7 ] [ 5 ] [ 7 ]. The display reads:

5554757

To mark the System Speed Dial number, precede the number by a [ ✳ ]. For example, to mark the number 555 1001, enter [ ✳ ] [ 5 ] [ 5 ] [ 5 ] [ 1 ] [ 0 ] [ 0 ] [ 1 ]. The display reads:

*5551001

4.At this point:

■To program another System Speed Dial number, start from Step 2.

■To program over an existing number, enter the new number after selecting the two-digit code.

■To remove a System Speed Dial number, enter the number’s two-digit code and press [ Mic ] once.

5.Press [ Feature ] [ 0 ] [ 0 ] to exit programming mode.

System Speed Dial Numbers 5-141