AT&T 518-455-317 manual System Password #403, System Password does not appear on display phones

System Password (#403)

Description

This System Programming procedure defines a four-digit password that users can enter from system phones other than the MLC-6. The password has two possible functions:

■To turn Night Service on and off (if Night Service is programmed).

■To override dialing restrictions (if the extension has access to an outside line).

Related Features

■Once a password is programmed, you must enter it to turn Night Service on or off. Additionally, if Night Service is on, users in the Night Service Group must enter the password to make outgoing calls (except numbers on the Emergency Phone Number List (#406) and Marked System Speed Dial Numbers). Dialing restrictions for extensions not in the Night Service Group remain the same as during normal daytime operation.

■The password overrides all dialing restrictions, but not Line Access

Restriction (#302).

Considerations

This feature is not available on MLC-6 or standard phones.

Programming

To program a System Password:

1 . Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 3 ]. The

display reads:

Set Password

Data----

2 . Enter a password up to four digits.

3 . Select another procedure or exit programming mode.

Using

1 . Before lifting the handset or turning on the speaker at a system phone,

press [ Hold ].

2.

3.

Enter the password.

The System Password does not appear on display phones.

Press an outside line button (or press [ Intercom ] [ 8 ] and the two-digit line number) and lift the handset.

4 . Dial the number.

The password is in effect until you hang up the phone.

5-138System Password (#403)