AT&T 518-455-317 manual Answer to that button

Programming

To assign or unassign an Automatic System Answer button with lights at extension 10:

1 .	Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 1 ] [ 1 ].
2 .	If you want to assign Automatic System Answer to the first available button on
	the system phone, press [ Next Data ] until the display reads:
	ASA Button
	1 Assigned-Ext10
	If you want to unassign Automatic System Answer, press [ Next Data ] until
	the display reads:
	ASA Button
	2 Not Assigned
	If you want to assign Automatic System Answer to a specific button, press
	[ 3 ]. The display reads:
	ASA Button
	3 Select Button
	Then press a programmable button with lights to assign Automatic System
	Answer to that button.
3 . Select another procedure or exit programming mode.
4 .	Label the Automatic System Answer button at extension 10.

Using

To turn Automatic System Answer on:

Press the Automatic System Answer button at extension 10.

The light is steady green and Automatic System Answer is on. If calls are ringing when Automatic System Answer is turned on, the calls will be answered immediately by the system.

To turn Automatic System Answer off:

Press the Automatic System Answer button at extension 10.

The green light goes out and Automatic System Answer is off. Any calls in the process of being answered by the system will continue to hear the recorded message and will be placed on hold.

5-18Automatic System Answer Button (#111)