AT&T 518-455-317 manual Following entries are valid

■Wildcard Characters. You can use wildcard characters in list entries. For example, your company’s Sales Department has a three digit account code—the first digit represents the department and the second and third digit represent the individuals in the department. You enter 4!! as the list entry.

-The following entries are valid:

401

410

499

455555

-The following entries are invalid:

4

44

Programming

To create a Forced Account Code List:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 9 ]. The

display reads:

FrcdActCd Lst

Entry:

2.Select a list entry (01–99). For example, to select the third entry, press [ 0 ] [ 3 ]. The display reads:

FrcdActCd Lst 03 Data------

3.Enter up to six digits for the list entry.

4.If the account code is five digits or less, you must press [ Enter ] to save the account code in memory.

5.At this point:

■To enter other account codes, press [ Next Item ] to select a different list entry and repeat Steps 3 and 4.

■To change the account code you just entered, press [ Remove ] and enter the correct account code, then press [ Enter ].

■To delete the account code you just entered, press [ Remove ].

6.Select another procedure or exit programming mode.

5-72Forced Account Code List (#409)