AT&T 518-455-317 manual Dial Mode #201, Valid Entries

Dial Mode (#201)

Description

This System Programing procedure identifies individual lines as touch-tone or rotary. You should check with your local phone company if you are not sure which type of line is being provided to you.

Related Features

■If you are having difficulty using touch-tone phones on rotary lines, you may need to adjust the Rotary Dialing Timeout (#108).

■If the system has rotary lines, you can use Touch-Tone Enable to send touch-tone signals over a rotary line (for example, to access bank-by-phone services).

Valid Entries

1 = Touch-Tone line ✔

2 = Rotary line

Programming

To change the Dial Mode setting for a specific line:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 2 ] [ 0 ] [ 1 ]. The

display reads:

Dial Mode

Line:

2.Enter the first line to be programmed. For example, to program line 8, press [ 0 ] [ 8 ].

3.To change the dial mode, press [ Next Data ] until the appropriate value displays.

4.To program another line, press [ Next Item ] or [ Prev Item ] until the correct line number shows on the display, and repeat Step 3 to change the mode.

5.Repeat Steps 3 and 4 for all lines that you want to change.

6.Select another procedure or exit programming mode.

5-40Dial Mode (#201)