AT&T 518-455-317 manual System Speed Dial Numbers p

(p. 5-86)

SYSTEM RESET – PROGRAMMING SAVED

System Speed Dial Numbers (p. 5-140)

(p. 5-139)

IMPORTANT: Using this procedure disconnects any active calls but retains system

settings. Use it only if the system fails to function correctly after a power failure or down period.

DIAL #728

To program a number:

PRESS [ Feature ] [ 0 ] [ 0 ] to enter programming mode

PRESS [ Feature ] DIAL a two-digit code (20–79)

DIAL the telephone number—up to 20 digits including special characters (see page 5-134)

To “mark” it (to override restrictions), dial★[ ] before the telephone number

To program another number, or to change a number, repeat

PRESS [ Feature ] [ 0 ] [ 0 ] to exit programming mode

To remove a number:

PRESS [ Feature ] [ 0 ] [ 0 ] to enter programming mode

PRESS [ Feature ] DIAL the System Speed Dial number's

code (20–79) PRESS [ Mic ]

To remove another number, repeat

PRESS [ Feature ] [ 0 ] [ 0 ] exit programming mode

Dialing Restrictions and Permissions

Groups Auxiliary Equipment

OUTCALLING CALL RESTRICTION

DIAL #401		(p. 5-118)
DIAL an extension number
DIAL 1 = No Restriction ✔
2	= Inside (intercom) Only
3	= Local (intercom and
		local) only

PRESS [ Next Item ] to program another extension

TOLL CALL PREFIX	(p. 5-144)
DIAL #402

DIAL 1 = 0/1 plus Area Code and

Number ✔

2 = Area Code and Number Only

SYSTEM PASSWORD (p. 5-138)

DIAL #403

DIAL four digits to set the password

DISALLOWED PHONE	NUMBER
LISTS	(p. 5-52)
DIAL #404
DIAL a list number (1–4)
DIAL a list entry (01–10)
To add entry:

DIAL the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

To program another list:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new list number, and repeat above steps

DISALLOWED LIST ASSIGNMENTS

DIAL #405 (p. 5-51)

DIAL an extension number DIAL a list number (1–4)

DIAL 1 = Assigned

2 = Not Assigned ✔

PRESS [ Next Item ] to assign another list

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension number, and repeat above steps

EMERGENCY	PHONE NUMBER
LIST	(p. 5-61)

DIAL #406

DIAL a list entry (01–10)

To add entry:

DIAL the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

ALLOWED PHONE NUMBER

LISTS	(p. 5-8)
DIAL #407
DIAL	a list number (1–4)
DIAL	a list entry (01–10)
To add entry:
DIAL	the telephone number (up to

12digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry

PRESS [ Next Item ] to program another list entry

To program another list:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new list number, and repeat above steps

ALLOWED		LIST ASSIGNMENTS
DIAL #408		(p. 5-7)
DIAL	an extension number (10–57)
DIAL	a list number (1–4)
DIAL	1 =	Assigned
	2 = Not Assigned ✔

PRESS [ Next Item ] to assign another list

To program another extension:

PRESS [ Next Procedure ] [ Prev Procedure ],

enter a new extension number, end repeat above steps

FORCED ACCOUNT CODE LIST

DIAL #505		(P. 5-71)
DIAL	a list entry (01–99)
To add entry:
DIAL	the account code (up to

6digits)

PRESS [ Enter ]

PRESS [ Remove ] to remove a list entry PRESS [ Next Item ] to program another

list entry

PICKUP GROUP EXTENSIONS

DIAL #501 (p. 5-125)

DIAL a group number (1–4) DIAL an extension number

DIAL 1 = Assigned to group

2 = Not Assigned to group✔

PRESS [ Next Item ] to assign another extension

CALLING GROUP EXTENSIONS

DIAL #502 (p. 5-35)

DIAL a group number (1–4) DIAL an extension number

DIAL 1 = Assigned to group

2 = Not Assigned to group✔

PRESS [ Next Item ] to assign another extension

NIGNT SERVICE BUTTON

DIAL #503			(p. 5-114)
DIAL	1	= Assigned
	2	= Not Assigned ✔
	3	= Select button then
			press a programmable
			button (to assign Night
			Service to that button)
	If you use option 3 after a
	Night Service button has
	been assigned, the Night
	Service button moves from the
	old button to the new button
	you select.
NIGHT SERVICE GROUP EXTENSIONS
DIAL #504			(p. 5-116)
DIAL	an extension number
DIAL	1	= Assigned to group
	2	= Not Assigned to group ✔
PRESS [ Next Item ] to assign another
	extension
HUNT GROUP EXTENSIONS
DIAL #505			(p. 5-88)

DIAL a group number (1-6, 7 for VMS) DIAL an extension number

DIAL 1 = Assigned to group

2 = Not Assigned to group ✔ PRESS [ Next Item ] to assign another

extension

VMS HUNT DELAY			(p. 5-153)
DIAL #506
DIAL	1 = Immediate ✔
	2	= Delayed
VMS HUNT SCHEDULE
DIAL #507			(p. 5-154)
DIAL	1	= Always ✔
	2	= Day Only
	3	= Night Only

FAX MACHINES EXTENSIONS

DIAL #601			(p. 5-68)
DIAL an extension number
DIAL	1	= Assigned
	2	= Not Assigned ✔
PRESS [ Next Item ] to identify another
	extension
MUSIC ON HOLD			(p. 5-112)
DIAL #602
DIAL	1	= Active ✔
	2	= Not Active

HOTLINE

DIAL #603

DIAL the hotline extension number (not ext. 10, 16, 22, 28, 34, 40, 46, or 52)

DIAL the alerted extension number (not the hotline) or [7 ] [ 0 ] to paging system

To remove the hotline and alert:

PRESS [ Remove ]

DOORPHONE 1 EXTENSION

DIAL #604 (p. 5-60)

DIAL an extension number (12–15, 18–21, 24–27, 30–33, 36-39, 42-45, 48-51, or 54-57)

DOORPHONE 2 EXTENSION

DIAL #605(p. 5-60)DIAL an extension number (12–15,

18–21, 24–27, 30–33, 36-39, 42-45, 48-51, or 54-57)

DOORPHONE ALERT EXTENSIONS

DIAL #606 (p. 5-59)

DIAL an extension number (except a doorphone extension)

DIAL 1 = Not an alert ✔

2 = Doorphone 1 alert

3 = Doorphone 2 alert

4 = Doorphones 1 and 2

PRESS [ Next Item ] to identify another extension (up to 48 alert extensions per doorphone)

AA EXTENSIONS (p. 5-2)

DIAL #607

DIAL an extension number DIAL 1 = Assigned

2 = Not Assigned ✔ PRESS [ Next Item ] to assign another

extension

SMDR RECORD TYPE (p. 5-132)

DIAL #608

DIAL 1 = All calls ✔

2 = Outgoing calls only

✔= Factory setting

= Button with lights required

SMDR TOP OF PAGE (p. 5-133)

DIAL #609