AT&T 518-455-317 manual Outgoing Call Restriction Button #114

Models: 518-455-317

1 288
Download 288 pages 20.16 Kb
Page 203
Image 203

Outgoing Call Restriction Button (#114)

Description

This System Programming procedure identifies a button on the system phone at extension 10 to be used to change the current Outgoing Call Restriction setting for a specific extension. This button is useful for quickly changing an extension’s restriction. For example, after a guest’s departure, a hotel manager can change the Outgoing Call Restriction setting of the room phone from No Restriction to Inside Only so outside calls cannot be made from the phone after the guest checks out. Conversely, a receptionist can change the Outgoing Call Restriction setting of a conference room phone from Local Only (which prevents users from making long distance calls) to No Restriction so a client can dial long distance.

Related Features

Rather than using an Outgoing Call Restriction button, you can use Outgoing Call Restriction (#401) to change an extension’s Outgoing Call Restriction setting through System Programming if you prefer.

You must use an Auto Dial button with lights to designate the extension you want to change after you press the Outgoing Call Restriction button. It is recommended that you use an Auto Dial button on the MLS-CA24 autodialer. However, you can use an intercom Auto Dial button on the system phone at extension 10 provided it has lights. For information about programming Auto Dial buttons, see Auto Dialing.

Considerations

An Outgoing Call Restriction button must be programmed on the system phone at extension 10.

Outgoing Call Restriction must be programmed on a button with lights. This feature does not work if it is programmed on a button without lights.

The system considers extension 10 busy while you are using the Outgoing Call Restriction button, and the phone acts as if it is in System Programming mode. You cannot use other features or handle calls at extension 10 until you are through using the feature.

You cannot use the Outgoing Call Restriction button to change an extension’s setting while extension 11 is in System Programming mode.

Valid Entries

1 = Assigned to next available button at extension 10

2 =

Not Assigned

3 =

Select button (then press a programmable button with lights to assign

 

Outgoing Call Restriction to that button)

5-120Outgoing Call Restriction Button (#114)

Page 203
Image 203
AT&T 518-455-317 manual Outgoing Call Restriction Button #114