Message Light Off (F10XX)
Description
This feature turns off the message light at a specified extension (where XX is an extension number from
Related Features
For instructions on turning on the message light, see Message Light On.
Considerations
■This feature turns off the message light on system phones and standard phones that have message lights. (See “Standard Telephones” in Chapter 1 for a list of standard phones with message lights.) Any type of phone can turn on or off a message light.
■For message waiting capability, standard phones with message waiting lights must be connected to an R3.1 206 module and the system must be equipped with an R3.1 primary processor module.
■Do not use this feature for an extension that is covered by the voice messaging system. The voice messaging system automatically turns off the message light at a subscriber’s extension when messages in the mailbox have been deleted.
If a message light is inadvertently turned off at an extension that has a message in the mailbox, the message light is refreshed during the voice messaging system’s daily maintenance (3 a.m.).
■If you use the Message Light On feature to signal someone at a doorphone extension, you must use this feature to turn the light off.
■You can program a Message Light Off button on a system phone to turn the message light off at a specific extension with one touch.
Programming
To program a Message Light Off button:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed with this feature.
3.Press a programmable button.
4.Press [ Feature ] [ 1 ] [ 0 ].
5.Optionally, dial the
destination, or skip to Step 6 if you want only the feature code on the button.
6.Program another button for this extension or exit programming mode.
