VMS Hunt Schedule (#507)
Description
This System Programming procedure determines whether the outside lines assigned to Hunt Group 7 hunt through the VMS Hunt Group all the time, only during Day operation (Night Service is off), or only during Night operation (Night Service is on). This feature affects only the Automated Attendant Service of the voice messaging system.
Related Features
■You must use Group Call Distribution (#206) to assign lines to Hunt Group 7.
■You must use Hunt Group Extensions (#505) to assign the extensions associated with the voice messaging system hardware to Hunt Group 7.
■If you set the VMS Hunt Schedule for Day Only or Night Only, you must use Night Service Button (#503) to program a Night Service button for extension 10.
Considerations
This feature applies only if you have a voice messaging system.
Valid Entries
1 = Always ✔
2 = Day Only
3 = Night Only
Programming
To change the VMS Hunt Schedule setting for the voice messaging system’s Automated Attendant Service:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 5 ] [ 0 ] [ 7 ].
2 . Press [ Next Data ] until the appropriate value displays.
3 . Select another procedure or exit programming mode.
