Examples
The examples below show how to enter telephone numbers for an Allowed Phone Number List in Step 4 of “Programming.” When an Allowed List is assigned to an extension, users can dial numbers on that list, even if the numbers would otherwise be restricted.
■Specific Telephone Numbers. Enter the phone number exactly as you would dial it. For example, to allow calls to the number 201
-Toll Call Prefix required
12015551111
-Toll Call Prefix not required
2015551111
■All Telephone Numbers in One Area Code. The following list entries allow calls to the 800 area code:
-Toll Call Prefix required
1800
-Toll Call Prefix not required
800
Programming
To create a list of Allowed Phone Numbers:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 7 ].
2.At the List No: prompt, enter a list number
1, press [ 1 ].
3.At the Entry: prompt, select a list entry
4.At the
5.To save the telephone number in memory, you must press [ Enter ].
6.At this point:
■To enter other phone numbers in this list, press [ Next Item ] and repeat Steps 4 and 5.
■To change the phone number you just entered, press [ Remove ] and repeat Steps 4 and 5.
■To delete the phone number you just entered, press [ Remove ].
■To create another list, press [ Next Procedure ] [ Prev Procedure ] and go to Step 2.
7.Select another procedure using [ Next Procedure ] or [ Prev Procedure ] or exit programming mode.
Allowed Phone Number Lists (#407)
